A moment of silence please.
I had my heart set on an electric composter similar to these because I liked that it did all of the mixing and tumbling for me and you got a batch of compost every few weeks instead of my year long wait till it rots method.
But before I make the spendy investment I vowed that if I can get the green to brown ratio right, don’t have slime mold or maggots, and get at least one batch of compost out of a new homemade compost bin then I will consider buying the electric composter. Don’t judge me Internet. I know I’m a little more than pathetic because I dream of compost bins instead something important like world peace.
I found my compost bin to be at Odd Lots. They had locking Rubbermaid tubs marked down to $5.00 a piece. I think the square size will be easier to turn with a shovel than my old tapered garbage can compost bin. However I prefer the locking the lid and kicking the bin on its side and rolling in around the yard method because I don’t have to stick my hands in the bin and get them all ookie.
My plan is to make two compost bins. When one is full I’ll let that sit and cook while I fill up the other bin. Sneaky eh?
How to Make a Compost Bin out of a Plastic Tub
You will need:
The dog as Project Manager is extra. You know how Blitzkrieg likes to pose for photos.
20 gallon plastic storage tub with a lid like this one - Try to get a locking one. You'll thank me later.
An electric drill and the largest drill bit you have - I used the largest drill bit from this drill bit set
4 bricks or flat stones
1. Use the marker to mark the areas with a little “x” where you plan to drill the drainage and aeration holes in the top, bottom and sides of the tub. Marking the holes before you drill ensures you have an even number of drainage and aeration holes throughout your compost bin to be. This is an optional step but highly recommended!
2. Put on the safety glasses and drill drainage holes in the bottom of the tub so your compost won’t develop dog vomit slime mold or maggots (true story.)
I chose to use my single speed drill for this project instead of Mommy’s Little Helper - my multispeed, mega torque cordless drill. Sure, I could have used a lower setting on Mommy’s Little Helper but I wanted to show my very first Single Girl Power Tool some love because it doesn’t see daylight very often these days.
3. Turn the plastic tub on its side and drill a series of aeration holes in the side of the tub. Drill slow/low power so you don’t crack the tub.
Lisa didn’t listen to me about drilling slowly and that’s why some of her holes are a little wonky. I had to manage this project by watching her through the patio door from inside the house while Lisa worked on the patio because I refuse to wear these sweet Doggles. She’s all about that safety thing.
4. Put the lid on the tub to stabilize it and drill a series of aeration holes in the lid.
Tip: By the way, did you know that if you drill a bazillion holes in a Rubbermaid tub you void the warranty on the tub? Me neither. I had no idea Rubbermaid tubs even had warranties until they rejected this project for their blog because it voids the warranty.
Why yes! Those ARE leftover bricks from my reclaimed brick garden border project!
Fortunately paper and cardboard also work nicely as brown material. I’m shredding paper, cereal boxes, toilet paper tubes, and telephone books in my paper shredder so it composts faster. I'm adding shredded paper to my compost bin for every layer of food scraps I put in.
The final cost? $12.00 for two compost bins and 2 packages of hamster bedding/wood shavings to use as backup carbons for my bin. Not a bad deal, don’t you think?
Do you compost? What are your secrets to getting nice, rich non slimy non maggoty compost?
If you'd rather buy than DIY check out the options - and more! - below!
Did you enjoy this post? Get more like it by subscribing to the Condo Blues RSS Feed or to Condo Blues by Email.